型號 封裝 在線定購
LPC2102FBD48(查看) LQFP48


技術資料—— LPC2102 PDF技術資料

LPC2102 概述

The LPC2102 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 16 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 pct over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

Due to their tiny size and low power consumption, the LPC2102 are ideal for applications where miniaturization is a key requirement. A blend of serial communications interfaces ranging from multiple UARTs, SPI to SSP and two I2C-buses, combined with on-chip SRAM of 4 kB, make the LPC2102 very well suited for communication gateways and protocol converters. The superior performance also makes the LPC2102 suitable for use as math coprocessors. Various 32-bit and 16-bit timers, an improved 10-bit ADC, PWM features through output match on all timers, and 32 fast GPIO lines with up to nine edge or level sensitive external interrupt pins make the LPC2102 particularly suitable for industrial control and medical systems.

LPC2102 參數
LPC2102 存儲器
FLASH (kB) 16
RAM (kB) 4
LPC2102 性能參數
fmax (MHz) 70
I/Opins 32
I²C 2
定時器 4
PWM 14
I/O 電壓 (V) 3.3
CPU 電壓 (V) 1.8
LPC2102 封裝與引腳
LQFP48, HVQFN48(7×7)

捕鱼大师官方网 qq游戏有三张牌吗 代理冷吃赚钱吗 快速赛车大小 北京十一选五技巧 澳洲幸运10群 青海十一选五软件下载 麻将怎么下叫 广东11选5开奖结果走势图 微博如何发视频赚钱 湖南快乐10分开奖记录