LPC2378

芯片信息

型號 封裝 在線定購
LPC2378FBD144(查看) LQFP144

引腳布局

(點擊圖片看大圖)
技術資料—— LPC2378 PDF技術資料

LPC2378 概述

The LPC2378 microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 pct over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

The LPC2378 is ideal for multi-purpose serial communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM (LPC2378 only), four UARTs, two CAN channels (LPC2378 only), an SPI interface, two Synchronous Serial Ports (SSP), three I2C-bus interfaces, an I2S-bus interface, and an External Memory Controller (EMC). This blend of serial communications interfaces combined with an on-chip 4 MHz internal oscillator, SRAM of 32 kB, 16 kB SRAM for Ethernet, 8 kB SRAM for USB and general purpose use, together with 2 kB battery powered SRAM make the LPC2378 very well suited for communication gateways and protocol converters. Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, PWM unit, a CAN control unit, and up to 104 fast GPIO lines with up to 50 edge and up to four level sensitive external interrupt pins make the LPC2378 particularly suitable for industrial control and medical systems.

LPC2378 參數
LPC2378 存儲器
FLASH (kB) 512
RAM (kB) 58
LPC2378 性能參數
fmax (MHz) 72
I/Opins 104
UART 4
I²C 3
I²S 1
SPI 1
SSP 2
ADC 8
DAC 1
定時器 4
PWM 6
I/O 電壓 (V) 3.3
CPU 電壓 (V) 3.3
LPC2378 封裝與引腳
LQFP144



捕鱼大师官方网 另管家婆 陕西福彩快乐十分电视版app 106官网彩票平台app 正版的欢乐炸金花 时时彩好软件 河南11选5奖金 白小姐开奖结今晚一 胜平负90403 168彩票开奖码计划 双龙彩票开奖直播